Positioning QardioBase extra feet

If you are looking to add some extra stability to your measurement taking experience on hard surfaces, read this article carefully to make sure you apply the extra feet correctly.


Apply the feet right in the middle of both sides of your QardioBase as pictured below. Make sure to push down firmly after first applying the feet.



A few things to keep in mind:

  • There is no need to use adhesive, simply peel off the plastic backing from both feet and they will stick to the bottom of the scale.
  • Make sure the bottom of your QardioBase is dry and clean before applying the feet.
  • To ensure you are applying the feet in the center of the scale, you can note the two horizontal lines on the top surface of your scale extending to the sides. The lines are exactly at the center point of the scale and can help you with properly aligning the feet on the bottom.
  • To ensure accuracy, do not use the extra feet on soft surfaces such as carpet.


You will find the optional extra feet in the envelope underneath your QardioBase in its packaging, or you can request the optional extra feet via support@getqardio.com.


Please note that these extra feet are slightly different in size from the feet which are already placed on your QardioBase. Therefore these extra feet cannot be used to replace one of the pre-placed feet. In case one of the original feet goes missing, don't hesitate to reach out to support@getqardio.com for assistance.


QardioBase is the wireless smart scale and body analyzer that combines intelligent features, ease of use, and sleek design to make weight and health management an integral part of your everyday life. Learn more about QardioBase smart scale here.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk