QardioMD section for iOS patients

This section of the consumer Qardio App is available only to accounts that are connected to their provider through the QardioMD platform. (Requires iOS app version 1.89.1 or later.)

 

When taking a measurement with a third party (non-Qardio) device, make sure to have the QardioMD section of the Qardio App open to save your measurements successfully.

 

QardioMD section of Qardio app

The QardioMD section will allow you to manually enter measurements or sync readings directly from another third-party Bluetooth device for Blood Pressure, Temperature, Oxygen Saturation and Blood Glucose.

IMG_9260.PNG IMG_9262.PNG

 

Blood Pressure

  • Tap the ‘+’ icon to manually add a BP measurement.
  • OR, go to Settings to set up your (TD-3128) blood pressure monitor (see instructions in the Settings section below).

Body Temperature

  • Tap the ‘+’ icon to manually enter a temperature reading.
  • OR, go to Settings to set up your Bluetooth thermometer (find more in the Settings section below).

Oxygen Saturation

  • Tap the ‘+’ icon to manually enter an oxygen saturation (SpO2) measurement.
  • OR, go to Settings to set up your Bluetooth pulse oximeter (see the Settings section below).

Blood Glucose

  • Tap the ‘+’ icon to manually enter a glucose measurement.
  • OR, go to Settings to set up your Bluetooth blood glucose monitor (find more in the Settings section below).



Settings

Go to the Settings page (located in the menu in top left corner of Qardio app) to set up your third-party Bluetooth devices, such as the TD-3128 blood pressure monitor.

 

Settings_Setup_Thermometer.png

Set up: Thermometer

In Settings, select “Set up your thermometer”, enter the device MAC address and select your temperature display unit (C or F) as shown in the image to the left.

 

 

Settings_Setup_PulseOximeter.png 

Set up: Pulse Oximeter

From Settings, select “Set up your pulse oximeter” and follow the in app instructions: Turn the pulse oximeter on and touch the device to your phone for Bluetooth pairing.

 

 

Settings_Setup_BloodGlucoseMeter.png

Set up: Blood Glucose meter 

From Settings, tap “Set up your blood glucose meter” and follow the in app instructions: Turn the blood glucose meter on and put it in pairing mode. Touch the device to your phone for Bluetooth pairing.

 

 

Settings_Setup_BloodPressure.png

Set up: Blood Pressure cuff (TD-3128)

From Settings, select “Set up your TD-3128”, follow the in app instructions: Press the M key for 3 seconds and touch your phone to the BP monitor to connect.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request